A narrow RFQ intake checklist for custom light-gauge slitting machines, covering coil width, thickness, material, strip program, surface, edge, blade setup, tension, and automation data.

A slitting and flatbed wear-parts trigger matrix for knives, bearings, rollers, belts, sensors, stripper plates, lubrication, downtime risk, and spare-parts handoff.

A slitting and CTL operating cost evidence matrix for separating energy load, idle time, setup loss, scrap, wear parts, downtime, safety holds, and product-route records before an RFQ.

An MD series material risk boundary checklist for slitting RFQs covering grade, strength, coating, surface risk, strip program, edge quality, model route, FAT/SAT samples, cases, and support handoff.

A slitting and flatbed automation handoff checklist for output state, recipe data, I/O boundaries, quality records, staging, downstream signals, product routing, and FAT/SAT checks.

A narrow slitting width tolerance measurement protocol covering sampling points, gauges, burr, camber, setup drift, FAT/SAT records, and corrective actions.

A narrow model-boundary checklist for choosing MD-1650 or MD-2200 slitting machines by coil width, growth, thickness, strip program, recoiling, floor space, crane capacity, and RFQ data.

A narrow MA-1350 mid-width slitting fit checklist for matching 300-1350 mm coils, thickness, strip count, tolerance, setup burden, case evidence, and support needs.

A narrow compact slitting acceptance checklist for material range, strip width, blade setup, burr, width tolerance, setup time, coil handling, FAT/SAT records, and model routing.