
Machine photo
Pipe rollers
Rollers support and guide the pipe as it moves through the machine. Their position is part of the handling arrangement that must be considered with pipe length and access.
Inside polishing
Equipment for polishing the inside wall of pipe, with machines listed across second, third and fifth generations. Compare the generation, model, polishing length and station information together.
Third-generation pipe polishing machine — drawing
The internal-polishing range is organized by second, third and fifth generation. Some model numbers appear in more than one generation, so compare the generation and model together with polishing length, station count and spindle information.

Machine photo
Rollers support and guide the pipe as it moves through the machine. Their position is part of the handling arrangement that must be considered with pipe length and access.

Machine photo
The frame carries the polishing assemblies and pipe supports. Compare the overall dimensions for the selected generation when planning the machine position and material path.

Machine photo
The site image shows pipe beside the machine. The layout should allow room to load, support and remove the pipe across its full working length.
Compare model dimensions, drive or motor data, and other listed specification fields.
| Model | Pipe diameter range | Polishing length | Stations | Spindle speed | Machine dimensions |
|---|---|---|---|---|---|
| MD76 | φ19-φ76 | 1.5-6.1m | 3 | 3000r/min | 13500×4500×2000mm |
| MD133 | φ50-φ133 | 1.5-6.1m | 3 | 3000r/min | 13500×4500×2000mm |
| MD168 | φ76-φ168 | 3-6.1m | 3 | 3000r/min | 17000×4500×2000mm |
| MD219 | φ89-φ219 | 3-6.1m | 3 | 3000r/min | 17000×4500×2000mm |
| Model | Pipe diameter range | Polishing length | Stations | Spindle speed | Machine dimensions |
|---|---|---|---|---|---|
| MD63 | φ19-φ63 | 1-6.1m | 4 | 7000r/min | 15500×4500×2000mm |
| MD133 | φ63-φ133 | 1-6.1m | 3 | 6000r/min | 15500×4500×2000mm |
| MD159 | φ89-φ159 | 1.5-6.1m | 3 | 6000r/min | 15500×4500×2000mm |
| Model | Pipe diameter range | Polishing length | Stations | Spindle speed | Machine dimensions |
|---|---|---|---|---|---|
| MD63 | φ19-φ76 | 4-6.1m | 4 | 7000r/min | 15500×4500×2000mm |
| MD133 | φ63-φ133 | 4-6.1m | 3 | 6000r/min | 15500×4500×2000mm |
| MD159 | φ89-φ159 | 4-6.1m | 3 | 6000r/min | 15500×4500×2000mm |
| MD325 | φ114-φ325 | 3-6.1m | 3 | 3000r/min | 16000×4000×2300mm |
| MD426 | φ168-φ426 | 3-6.1m | 3 | 3000r/min | 16000×4000×2300mm |
When enquiring, include the model number and, for internal polishing, the generation so the correct record can be reviewed.
Share the material, size and required result for this machine. We can then review the relevant model information and project scope.