
Machine photo
Forming rollers
Forming rolls gradually shape the strip as it moves through the production line. Their arrangement helps explain how the line transitions from flat material to welded tube.
Tube production
Complete welded-tube production lines for forming metal strip into welded tube. The range covers seven listed sizes, with the line arrangement matched to the selected tube range and project.
Complete welded-tube production line
Start with the outside diameter and wall thickness the line must produce, then compare the listed model range. Each option is presented as a complete welded-tube production line; the included units and final arrangement are confirmed for the selected project.

Machine photo
Forming rolls gradually shape the strip as it moves through the production line. Their arrangement helps explain how the line transitions from flat material to welded tube.

Machine photo
The drive assembly transfers motion through the line. Compare the listed motor information with the selected model and confirm the final drive arrangement for the project.

Machine photo
This detail shows one enclosed section within the line. Use it with the complete-line views to understand where the section sits in the production sequence.
Compare model dimensions, drive or motor data, and other listed specification fields.
| Model | Horizontal shaft | Vertical shaft | Tube outside diameter | Wall thickness | Drive motor | Machine dimensions |
|---|---|---|---|---|---|---|
| MD-40S | 40mm | 25mm | φ6-32mm | 0.2-1.0mm | 5.5kW | 20m×1.0m |
| MD-40 | 40mm | 25mm | φ8-51mm | 0.3-1.8mm | 7.5kW | 21.5m×1.1m |
| MD-40L | 40mm | 25mm | φ12-64mm | 0.3-2.0mm | 11kW | 21.5m×1.1m |
| MD-50 | 50mm | 30mm | φ25-76mm | 0.3-2.0mm | 11kW | 24m×1.2m |
| MD-60 | 60mm | 40mm | φ50-114mm | 0.3-2.5mm | 15kW | 26m×1.4m |
| MD-80 | 80mm | 50mm | φ89-186mm | 0.8-3.5mm | 18.5kW | 32m×2.3m |
| MD-100 | 100mm | 60mm | φ114-219mm | 1.0-5.0mm | 22kW | 36m×3.5m |
When enquiring, include the model number and, for internal polishing, the generation so the correct record can be reviewed.
Share the material, size and required result for this machine. We can then review the relevant model information and project scope.